Alumil Cyprus
Choose your local website
Switch country
United Arab Emirates English
United States English
India English
International English

FAQs

Aluminium profiles are divided into architectural and industrial ones. Architectural aluminium profiles are used for the manufacture of products designed and developed by Alumil and marketed for all kinds of applications. As aluminium covers a particularly wide range of products and applications beyond those of Alumil, it is possible to mass-produce profiles according to the customer's requirements and orders. In this case, we refer to the industrial profile.

The frame type you choose is very important and depends on many factors. For example, the available space within the house (furniture, decoration, etc.), the window spans you want to cover, the aesthetics of the space and the building, and many other factors. You can see in detail all the types and further information about the  categories so that you can more easily form an opinion on the suitable frame, but above all, the one you prefer for your space. It is necessary to seek the advice of an expert engineer who has the experience and expertise to suggest the most suitable system based on the requirements of your space.

The reason for choosing a thermally insulated frame is very simple. Because it maintains the internal temperature, minimizing losses. In this way, greater efficiency and economy is achieved. However, you should think not only about the winter months, which represent the typical example to describe heat losses, but also the summer months. Due to the climate of each region and the high temperatures, it is essential that the cooling we try to achieve inside the house during summertime is contained and not channeled to the outside environment through the windows.

The pane (or glazing) constitutes 70%-80% of the surface of a window frame. Thus, its effect on energy efficiency, sound insulation, and security is significant. There are many types of glazing that determine both the final performance of a frame and its aesthetics. If you want to approach a fabricator already knowing specific attributes for glazing, you can learn about the  types and  categories of glazing with specific features to make the right choice that will fully serve your needs.

There is often a misconception between these two terms. However, curtain walls, which are a category of the aluminium systems family, should not be confused with glazing, which is a type of common panes.

Aluminium is a material that is significantly superior to any other material used in the construction of frames. It is a metal that does not rust and needs little to no maintenance, which makes its lifespan longer than that of plastic (PVC) and wood, with which, over time, natural wear is inevitable, and maintenance is necessary even on an annual basis. It is also suitable for several surface treatments. This helps you to make the right choice according to your requirements and needs.

Of course, since we have our own in-house control simulation facilities and all our systems follow procedures certified by internationally recognized organizations and institutes. If you check out the product(s) you are interested in, the "performance" section lists all the certified indicators a frame receives, such as thermal insulation, waterproofing, burglar resistance, and many more factors.

The best option we suggest is to make an appointment and visit one of our  showrooms. There, an experienced Alumil consultant can help you and, based on your needs and requirements, can suggest the ideal system, which you can check in person. However, sometimes distance and unexpected situations may not make visiting our showroom feasible. Nevertheless, our 30-year presence in the industry has contributed to developing a solid network of trusted  partners that extends to every corner of Greece and consists of more than 1,000 fabricators of aluminium systems who can help you make the right choice.

The aluminium profiles that are produced and receive surface treatments by Alumil (anodizing, powder coating, etc.) are offered to dealers and fabricators with the protective film (foil) bearing our company's logos. This film is removed during the installation of the systems in your place. If your systems are not protected by this film during installation, it does not necessarily mean that they are not Alumil, but most likely, they are uncoated profiles from our company that were requested as such by the dealer or fabricator in order to receive surface treatments by one of their partners. By installing aluminium systems that have passed every process certified by our company, you are ensuring the highest quality. 

Finally, there are a number of further checks you can make during the installation of your new windows, and you can find them in detail in our comprehensive  guide.

Because Alumil's high-quality systems bring 30 years of experience, know-how, and passion. After all, as our motto declares, we are building excellence every day, offering solutions in products that provide: 

  • High aesthetics according to the latest architectural trends. 

  • Energy efficiency through advanced thermally insulated aluminium systems as well as shading systems. 

  • High level of security against burglary, vandalism, fire, smoke, and earthquakes. 

  • Protection even in extreme weather conditions. 

  • Various solutions for persons with disabilities. 

  • Renewable energy solutions through the integration of photovoltaic systems in building components.

We offer solutions that cover every need. For instance, our solutions include:  

  • Hinged systems for doors & windows 

  • Sliding systems for doors & windows 

  • Shutters & rolling shutter systems  

  • Systems for folding doors 

  • Entrance doors  

  • Fire-rated doors & heavy duty doors 

  • Curtain walls & building facades 

  • Interior partitions 

  • Shading systems 

  • Facade cladding systems  

  • Systems for patios & greenhouses 

  • Customized systems for windows and curtain walls  

  • Polycarbonate sheets 

  • Railings  

  • Pergolas  

  • Flooring systems  

  • Photovoltaic systems integrated into building components (BIPV) 

  • Photovoltaic panel support bases

Alumil was founded in 1988 by its current shareholders (the Milonas family) after their withdrawal from the "Aluminium Industry of Northern Greece," which was also active in the production of aluminium profiles. In March of the same year, the construction of its industrial facilities began in the Industrial Area of Stavrochori, Kilkis. Despite the economic recession faced by our country, we remain a purely Greek company that employs over 900 people in Greece, with a successful track record of continuous growth and long-term vision while always looking to the future with optimism. Our successful course is confirmed by our presence in over 60 countries. The world's love for Alumil's top aluminium systems has allowed us to operate in every corner of the world, from the largest and most imposing buildings to the offices of leading companies and modern architectural creations. For every home that chooses Alumil, we take pride in bringing light, security, and warmth to your space. Our best  projects worldwide are an inspiration to the architectural world and beyond!

If you need further assistance and/or information from Alumil, we will be happy to be at your disposal. You can fill in the interest form or contact us by phone using the numbers we provide on our website.

Aluminium is 100% recycled (!) and is rightly described as a "green" metal. Aluminium, when recycled, can be easily separated from other materials without high costs. Moreover, recycling can be repeated indefinitely, producing a metal with properties comparable to those of primary aluminium. Lastly, the production of metal from the remelting of used and scrap aluminium requires only 5% of the energy needed to produce primary metal (that is made from bauxite).

Surface treatments serve various purposes, such as improving the appearance, protecting against corrosion or wear, enhancing adhesion, reducing friction, providing insulation or conductivity, and altering surface properties to achieve specific functionalities.

Selecting the appropriate surface treatment depends on the desired properties, intended application, environmental conditions, budget, and regulatory requirements. Consulting with our fabricators can help you determine the best solution.

The term “Frame” generally refers to all those elements that are used to enclose the spans of the walls in a building. They can be divided into external (entrance doors, balcony doors, and windows) and internal (entrance doors and partitions). They may differ in construction material between aluminium, wood, PVC/plastic, steel, or iron. The term 'Aluminium System' refers to the overall construction of the window frame (profile and set of accessories), excluding the glazing. Aluminium systems also include pergolas, fences, railings, etc.

Each feature is of special importance, and you should pay attention to all of them when choosing your frames. The key performance features to consider when selecting the right aluminium system are:  

  • Thermal insulation 

  • Security (burglary resistance) 

  • Wind load resistance 

  • Watertightness 

  • Air permeability 

  • Sound insulation 

Lastly, you should consider that installing or replacing windows and doors is an important decision that can often be called a "life decision.” If you take into account the period of time that the systems remain in a home until they are replaced, then you realize that the choice should be particularly careful.

Aluminium is a good conductor of heat, i.e., it has the ability to transfer heat energy across its surface. Frames called "cold" do not incorporate a material that stops this thermal conductivity, and as a result, the external temperature is transferred unobstructed to the interior, and the losses of internal heating or cooling to the external environment are very high. To avoid these effects, a polyamide material is used, called "thermal break," as it stops heat transfer. Thus, aluminium thermally insulated systems maintain the conditions inside, capturing heat in the winter and cooling in the summer. Simply by lifting the gasket on the frame, you can easily identify if the system you have in your place is thermally insulated, as the thermal break material is visible both on the sash and around the frame (it just needs to lift the gasket a little).

Curtain wall systems are used as a building envelope and ensure maximum natural lighting in the internal space, creating a comfortable and safe environment for the people who use the building. Usually, they are found in big buildings covering their façade but in recent years, they can also be found in modern private residences covering any kind of window span, from a living room with a special view to a stairwell. In addition, aluminium curtain walls are also a very popular choice due to their high aesthetic value and the unlimited possibilities they offer in architectural applications. At Alumil, you will find a  complete range of curtain walls that are divided into three (3) main categories: stick type (conventional), structural and unitized.

Certainly not! You can choose from a wide range of colors and textures. Aluminium has an advantage over other materials as it can be coated in many ways. Dark or light colors, matt, smooth, metallic, or even brushed, with wood effects, Alumil’s systems know no limitations. You should consider that, apart from aesthetics, surface treatments (color & texture) are responsible for protecting aluminium profiles from the factors of the external environment and everyday use. They provide all those features to counteract corrosion, peeling, and discoloration. Therefore, correct application and the use of high-quality raw materials can determine the final product's value. Check out our  surface treatment guide so you can make the best choice confidently.

The premium quality materials and high standards we ensure prolong the life of a system. However, as experts in the industry for over 30 years, we can give you some useful advice.  Find out how you should clean and maintain a frame.

Our extensive experience and know-how allow us to equip not only the interior but also the exterior of your home, providing top solutions. You can find a wide range of pergolas, composite materials for fencing, façades and outdoor decking, to top quality railings. You can download our catalog of all our outdoor solutions.

Choosing new frames is an investment that will last for many years, so you should pay attention during delivery and installation so that everything is properly done and avoid any unpleasant situations in the future. There are very important checks that should be made on the delivery of the frames, such as observation for external scratches and confirmation of Alumil's logo existence on every profile and component of the frame. In addition, the functionality of the frames should also be checked, and they should be perfectly straight with no inclination. Lastly, the testing varies according to each frame type (hinged, sliding, entrance doors, rolling shutters, and accessories). Therefore, you should get informed based on Alumil’s detailed  inspection guide. 

At Alumil, we are building excellence every day. Modern production facilities and strict quality controls ensure the creation of superior quality products with high added value. Having one of the most modern Research & Development departments, we can offer unique solutions with innovative and advanced features that meet the needs of our customers and can be fully adapted to them.  

Innovating for more than 30 years, we have managed to be at the global forefront and to be one of the largest Greek multinational companies. Thus, today we have more than 2,200 employees with high expertise and passion for excellent results, allowing us to play a leading role in the design and production of architectural systems. We have 12 factories in Europe, distinguished by their state-of-the-art production lines.

We produce architectural aluminium systems for doors, windows, curtain walls, as well as products ideal for exteriors, thus offering a variety of complete solutions for your home, cottage, or workplace. 

At Alumil, we produce aluminium profiles, accessories, and all those necessary products needed for a frame (except for glazing), but we do not undertake the fabrication and installation of the frame. For this reason, we cannot offer sales prices for the products. You can search for your nearest aluminium system fabricator through our network of partners, who will help you choose the right aluminium frames and provide you with a quote based on your needs.

If you would like to work with us, you can find available jobs in the relevant section on our website and submit your application. The success of our company comes from its employees. That is why Alumil remains a people-oriented company, looking for new ideas and employees with passion.

Part of our corporate philosophy and culture is the utmost respect towards nature, as well as the development and production of environmentally friendly products. These values ranked us among the 25 companies listed as  "The Most Sustainable Companies in Greece 2020" based on the data of the Sustainable Development Report presented in 2019. Our modern systems receive the EPD (Environmental Product Declaration) certification, a validated and registered statement, internationally recognized, providing transparent, quantified, and comparable data on a product's life cycle and environmental impact. Its main objective is to provide reliable, comparable, and verified information on the environmental footprint of products, covering their entire life cycle. 

The term "life cycle of a product" (LCA) refers to the raw materials required, their packaging and transport to the production site, the production process of the product itself, its distribution to the customer network, and finally, its application.

Surface treatments refer to processes or techniques applied to the surface of a material to modify its properties or enhance its performance. These treatments include coatings, finishes, cleaning methods, and other surface modifications.

Surface treatments offer several benefits, such as:

  • Enhanced durability and protection against corrosion, abrasion, or wear.
  • Improved aesthetics and visual appeal.
  • Increased chemical resistance.
  • Enhanced electrical or thermal conductivity.
  • Improved adhesion for bonding or coating applications.
  • Reduced friction or improved lubrication properties.
  • Alteration of surface energy or wettability.

Some surface treatments may involve chemicals, coatings, or finishes that can have environmental implications. It's essential to consider the ecological impact and adhere to regulations regarding waste management, emissions, and the use of hazardous substances. At Alumil, our production lines are equipped with a green management system that ensures the elimination of toxic substances such as powders and chemicals. Additionally, we have implemented measures to reduce water consumption, all of which are in line with current environmental legislation.