AlumilCal Database Update - 13034
- P200 Slim – New System added
- Prices have been updated according to the latest catalogue changes
- Hardware
- Added new preselector 854-15-360-XX
- Added the weight holding mechanism for 300 Kg Rollers as optional for S560 and S560 LT and S700 series.
- Added lock 440-22-852-00 in P100 & P200
- Added new lift & slide mushroom locks for S560, S700, M450, M45000
- Series S67/MD67
- Ix values for T profiles S67916 and S67914 with reinforcement have been corrected
- Wall connection 312-11-500-00 has been replaced by 312-67-000-03
- Corrected cutting for profile S67656 in case of double door without threshold typology
- Added profile S67964 for coupling
- Series S67 Urban
- Glazing list updated
- Series S650
- Corrected cutting of S31694 profile in case of Flat frame.
- Added required additional A/T and curtain wall profiles for curtain wall connection
- Series MF65
- Threshold profile M65140 has been changed, the code remains the same. Please note that the cutting of the adjacent profiles are changed as well.
- Added screw every 450mm to profile M65102 798-83-306-10 & 798-21-448-25
- Series M9660
- Added handle 380-90-125-XX for 2xTilt and Turn typology
- Added sashes M19762 & M19764
- Added mechanical corner cleat 125-15-274-00
- End caps of adjoining profiles M19680 & Μ19682 have been corrected to 300-19-683-00 & 300-19-682-13 respectively
- Curved glazing beads deleted for the catalogue
- Added new meeting style profile M19644. The cap is 300-19-644-03
- Low threshold end cap for M19862 has been replaced to 310-19-862-00
- Corrected dimensions for Hardware GU Unijet-D Variable 15mm
- M19752 new hidden sash profile is added
- Series M9400
- Added hinges for pivoted door
- 160-11-211-91 replaced by 160-11-211-00
- Added alignment corner 180-20-000-00 to sash M9372
- Changed corner connector to M9401 frame profile
- Series S77/SD77
- Brush Pile 16mm 620-11-600-00 replaced by Brush Pile 16mm 620-29-163-03
- Added adjoining sash profile S77980
- Added S70830 Add-on profile (for connection of hinged system S77 with sliding system S700)
- Series S700
- Corrected cutting of S70815 in case of Standard Frame
- Added central seal machining for bottom frames S70702, S70764, S70820
- New handle for hinged Fly Screen 610-00-701-00
- New frame connector 145-11-356-00 for corner typology
- Corrected drainage machining of sash profile S70776
- Series M13800
- Flat box 185X205mm added with profiles Profiles Μ138024 and Μ138026 and Accessory 765-13-820-03 Insulators for side caps
- Profile M1035 Flat rolling shutter guide with 200mm wing added to be compatible with 25x27 box
- Intermediate rolling shutter divider 765-13-185-00 (cast aluminum), added in all 185x191mm boxes.
- The drawing of the profile 303022 has been changed.
- Series S560 LT
- Fly screen glazing in case of standard variant has been corrected
- Updated glazing list for bead S540
- The problem of wrong additional profiles length calculation in case of profile splices has been corrected
- Gasket for hook profile 240-00-462-01 has been replaced by 240-00-563-00
- Series S560
- Fly screen glazing in case of standard variant has been corrected
- Added Uf Values
- Added brushes 620-69-308-03 in case of narrow interlocking
- 110-05-156-00 has been replaced by 620-69-308-03
- Updated glazing list for bead S540
- Corrected calculation of PVC bar 660-00-462-00 for interlocking profile S462
- Added frame rails S520 & S522
- Gasket for hook profile 240-00-462-01 has been replaced by 240-00-563-00
- Series M50
- Added Uf values
- Series M630
- Corrected drainages machinings
- Series SD115
- Window gasket 220-10-003-03 is replaced by 250-11-514-03
- S11528 replaced by S11521
- Series M14600
- Added shutter blind M9356 as an option
- Added handle options when flyscreen is placed inwards.
- Series M8200
- Added new profiles M8222 for 12+12 glazing and M8229 for 8+8 and 10+10 glazing
- System M45000
- Added Μ45028 sliding sash profile for single glazing and the glazing list of the specific sash
- Series M450
- Added mushroom lock 415-34-254-XX & 415-34-258-XX
- Series SF85
- Corrected gasket 250-85-000-03 length
- Shoot-bolt Adjuster 474-65-104-00 is added to all typologies
- Series M35
- Single point latch lock code 440-22-852-08 is replaced by code 440-78-525-00
- Series M7
- Corrected the machining of single point lock handle for M109910 insertion.
- Series P150
- Profile S30x30x1.3 is replaced by S-20x10x1.5
- S650 Emotion
- Corrected notch machining in the interlocking side.
- Series SD95
- Added Uf values
Related Files
