Technical News
Find what you need fast and easily
September 2023
August 2023
8/25/2023
- Footnote for low threshold typologies: Not suggested for exposed openings.
- Footnote for low threshold cap: Keep it only for low threshold
8/25/2023
- T-profiles for glass door sashes S67582, S67882, S67584 have been added on the chapter of profiles index and profiles 1:1
8/25/2023
- Summary of central gaskets & vulcanized corners per version has been added
8/25/2023
- Brush replacement machining for the S50079 profile for the Intergrated Flyscreens IFS has been added
8/25/2023
- Roller 660-28-650-00 has been replaced by 660-29-650-00 and inox rail 660-00-650-00 by 660-01-650-00 for optimal operation. Attention: New roller works only with the new inox rail.
8/25/2023
- Brush replacement machining for the S50079 profile for the Intergrated Flyscreen IFS has been added
8/25/2023
- Brush replacement machining for the S50079 profile for the Intergrated Flyscreen IFS has been added
July 2023
7/27/2023
- Machinings and assembly of the kickplate have been added on the chapter of general milling-tooling operations.
7/27/2023
- Roller Hinge Placement has been added.
- We also add the detail "Always secure all hinges after door installation with the middle screw before glazing"
7/27/2023
- Cutting of the flyscreen sash M868 has been corrected into W-40.2mm in ils2 k ils4 typologies
7/27/2023
- Flyscreen Sash machining with flat track has been added on page 88
7/12/2023
- The sash S67140 (opening outside) only fits with the add-on profile S67142 page 52
- The sash S67102 (opening inside) also fits with S67166 and with S67142 pages 54-55
- 310-67-166-00 (cap for S67166 for single point lock) has been added on the chapter of accessories
7/12/2023
- Typology PLS7 has been added - 2+2 Sash Corner Lift and Slide 45 Degrees Cut Sliding Window
June 2023
6/28/2023
- Sash S67938 has been removed from the door's selection, it is no longer proposed.
6/28/2023
- Perforation machinings for the slats 303019 & 303023 have been added.
- Rolling shutter guides Μ1038, Μ1039, Μ1040, Μ1103, Μ1105, Μ1120, stiffeners Μ11387, Μ12412 and add-on profile M9010 have been added on profiles
6/28/2023
- On the Locking Mechanism Detail page 234 rod dimensions have been corrected
6/28/2023
- Handle flyscreen profile M870 has been replaced by M876 for optimal operation when opening the flyscreen.
- 240-14-649-XX Pvc for flyscreen is also available in white color.
- 240-14-649-02 white, 240-14-649-03 black
6/14/2023
- Correction of 4901014116 Lock secury has been made, 4901013116 is the right one.
- Details for sash intumescent tapes installation have been added on fabrication manual chapter
6/14/2023
- IFS machinings have been added on Fabrication Manual