Technical News

• Dimensional limitation updated. The calculation of the static diagrams is now made according to EN 14024
• Add-on profiles S67964 & S67048 added on the profile index & profile 1:1 chapters

• Catalogue updated with gutter and subsills
• The correct S35019 trimming was replaced in the sections of the pocket typologies and the profile cuttings for the widths for sashes, flyscreen sashes and shutters were corrected.

• Central seal 311-00-700-00 replaced by 660-00-903-00

• Seal for anchor 290ml transparent code 770-54-662-00 added on the chapter of accessories.
• The application of 770-54-662-00 added on the chapter of instructions page 78.

• Dimensional limitation updated. The calculation of the static diagrams is now made according to EN 14024. 

• 3 typologies added: No 3 Four-Sash with meeting stile, No 4 Four-Sash with meeting stile and fixed and No 5 2+2 sash sliding window with 90° inner corner meeting stile.
• Profile S31735 (Reinforced sash) added on profile index and profiles 1:1.
• Dimensional limitation chapter updated.
• Accessory 311-31-620-03 (Set of end caps for corner typology) added on the chapter of accessories.
• Electric Kits for all typologies added on the chapter of accessories.

• Maximum Dimensions of M19626 added on all typologies of M9660 phos
• Milling tool for Hidden Sash code 852-19-634-00 added on the chapter of accessories

• Additional profiles S70802 & S70809 (caps) added on the index profiles and profiles 1:1.
• Decorative track profiles for fixed sash added on the general milling-tooling operations chapter page 256.
• Accessories 311-70-802-03 & 311-70-809-03 pair of end caps for S70802 & S70809 cap profiles for fix sash added on the chapter of accessories.

Τechnical characteristics updated:

• Glazing up to 44mm, Thermal insulation Uf = from 1,9 to 3,2 W/m2K
• Accessories added on the chapter of accessories: 380-05-000-ΧΧ (door handle with rosette), 450-49-450-00 (door lock 3-point 45/85/24/3) & 440-00-450-00 (single point latch lock 45/85/22/3).

• Additional profile S67115 (water drip) added on profile index & profiles 1:1
• Accessory code 310-67-115-03 (hidden sash pair caps for S67 low threshold for S67115)

• Profile S70830 (additional profile for connection of hinged system S77 with sliding system S700) added on profiles index and profiles 1:1 chapters

• External sliding sash stopper added on the chapter of accessories code 6606252102 (white RAL 9016), code 6606252103 (black RAL 9005) και code 6606252109 (silver RAL 9006)

• Flyscreen handle with adhesive tape code 610-00-701-33 (natural anodized 101020) and 610-00-701-45 (black anodized 103520) replaced the previous code 610-00-862-00 in typologies and added on the accessories chapter.

• Typology Νo. 19 added on the technical catalogue (Single leaf outwards with glass pane one fixed)
  

New Technical Catalog added

• SMARTIA FC80 is an advanced and multiform fencing system with a wide range of aluminum louvers and other decorative elements (composite wood, aluminium sheet, glass panel, inox), placed inlaid, between the mullions.
• At the same time, it offers a vast variety of technical solutions and applications with high levels of innovation, being undoubtedly a valuable tool for architects and consumers, which can meet all the technical and aesthetic needs of a project.

• Change of version name

• Drainage machining added on the Milling-Tooling Operations chapter pages 201-207

• Roller shutters sections for M9660 system corrected in the chapter of Rolling Shutters Sections.
• The limit of extruded slats have been updated.

• Integration of S350LT
• Correction of milling for flush sliding handle EX-61024570xx in page 16
  

• Installation manual for gearbox of concealed mechanism 180kg in page 22.
• Installation manual for concealed door hinge in page 45.
• New electric striker for panic bar Alumil in page 59.
• Removal of motor Force from our range in page 65 due to the cessation of production from the supplier