Technical News
Find what you need fast and easily
August 2020
8/27/2020
- S70782 has been added on the catalogue (on page 39)
- 240-70-799-00 Connector Gasket Pair for S70799 has been added on the catalogue (on page 281)
- On typology S700 sliding with fixed inside No 20 on pages 179 - 182, S70758 is the only one that appears on typology, S70754 has been removed.
- S70834 has been added on the catalogue (page 42)
8/25/2020
- Single roller 600-14-601-00 has been added on accessories (page 382)
8/25/2020
- New typology: double sash with 25mm narrow interlocking has been added on the catalogue (No 22)
8/6/2020
- Sash dimension constraints have been added on the catalogue (on page 220)
8/4/2020
- Two pages with folding door operation have been added on the catalogue (pages 240-241)
July 2020
7/31/2020
- Accessory 660-12-500-00 has been replaced with 660-12-700-00 on all typologies.
- New typology Νο11 added on catalog: corner Assembly with four sash parallel side (Exterior Corner).
7/30/2020
- New Punching machine 8000971000 and new cuttings to Spacer M109683
7/30/2020
- New Punching machine 8000971000 and new cuttings to Spacer M109683
7/23/2020
- Two new typologies have been added on the catalogue: Single and double sash entrance door opening inward with glass panel with 15mm threshold (No 2, 4)
- Two new typologies have been added on the catalogue: Single and double sash entrance door opening outward with glass panel with 15mm threshold (No 9, 11)
- New typology has been added in the catalogue. Single sash entrance door opening outward with aluminium panel and glazing bead (No 17)
7/14/2020
- Profil S95026 has been removed from catalog and on page 88 fixed typologies are replaced with frame-frame config.
- Typology has been removed: "One sash opening outward entrance door with fixed parts and aluminium panel"
7/14/2020
- Four (4) new typologies with 15mm low threshold have been added on the technical catalogue (No 15, 16, 32, 33).
- Two (2) new pages: Hidden sash glazing bonding has been added on the glazing chapter (page number 208-209).
- Four (4) new pages: Cap for addition profile S77072 machining , 310-77-070-00 , has been added on catalogue (page number 239-242).
7/3/2020
- New typology has been added on the catalog FLS2, ''Fixed - Lift & Slide Window with Fixed Outside''
June 2020
6/19/2020
- Accessory assembly page has been added on the catalogue. Accessories involved: 311-31-604-03 and 798-12-242-13 on page 114.
6/16/2020
- Section with cone of influence has been added on the catalogue
6/12/2020
- Accessory 660-01-452-00 has been changed to 660-01-560-00.
6/8/2020
- Quantity correction for 380-85-001-00 on page 67, correct quantity: 2