Technical News
Eight (8) new pages have been added on the catalogue:
- Cuttings and accessories for sashes with 36mm glazing width (pages 90-97)
Kooltherm code numbers replaced with NRG bar code numbers (profile 1:1 chapter)
The Μ8217 and Μ8219 (1:1profiles, Sections and typology characteristics) have been added in the catalogue.
- S67014 , S67016 profiles have been added on the catalogue.
- 35mm locks have been removed from General Milling - Tooling Operations Chapter (pages 72-76)
The technical catalogue SMARTIA S67 has been renewed.
- S67914T - Profile for hidden sash has been added on the catalogue.
The technical catalogue SMARTIA S67 has been renewed.
- Corrections on glazing cuttings and setting block quantities (for fixed typologies only)
The technical catalogue SMARTIA M7 has been renewed.
- New content on pages 270 and 271.
The technical catalogue SUPREME SF85 has been renewed.
- Glazing block bridge 290-85-010-03 has been replaced with 290-00-004-00 and 290-00-005-00 , 4mm and 5mm (typologies: Νο12 - Νο15)
The technical catalogue SMARTIA S67 has been renewed.
- The profile S67922 has been removed from the catalogue.
- The profile S67994 has been corrected. The correct number is: 180-77-155-00.
The technical catalogue SMARTIA M7 has been renewed.
- Page 271 has been added.
- Components 7201097000 and 7201096900 have been added.
The SUPREME S77 catalogue has been renewed.
- The profile S67178 has been removed from the catalogue.
- Advance plus section has been added on the technical catalogue on page 7.
The technical catalogue SMARTIA M7 has been renewed.
- Pages 269 and 270 have been added
- The gasket 2305005003 has been added
The technical catalogue SMARTIA S560 has been renewed.
- The S592 frame barrier page has been replaced on the general milling tool operation chapter on page 181
Renewal of fabrication manual SMARTIA M630.
- The fabrication manual has been renewed.
The technical catalogue SMARTIA M9660 has been renewed.
- The profile M19860 has been added on page 60
- The accessory 310-19-860-03 (pair of side caps for door sill M19860 has been added on the catalogue
Alwood typologies have been added on the catalogue
- Three window typologies
- Three door typologies
The technical catalogue SUPREME SF85 has been renewed.
- The red lines have been removed from the sash dimension constraint diagrams on page 146.
The catalogue SMARTIA M8200 has been renewed.
- The M8214, M8215 and M6027 profiles, as well as the component 7984124813 have been added in the catalogue.
The SMARTIA S560 catalogue has been renewed.
- Changing for the 660-01-452-00 central seal accessory in the catalogue of SMARTIA S560.