Technical News
Find what you need fast and easily
October 2023
10/25/2023
- New solution has been added: Section 13a for Single side-hung casement outdoor and Double side-hung casement outdoor, low threshold
10/25/2023
- Dimensions have been corrected in pivot machinings.
- Reversing profile height has been corrected in pivot typology No50 Pivot horizontal axes.
- Reversing profile width has been corrected in pivot typology No51 Pivot vertical axes.
10/25/2023
- Cuttings of sash M4544 have been corrected in typology PS8 Three Sash Sliding Window 90° Cut (Sash M4544) Right
10/25/2023
Glazing List for the typology PLS3 Two Sash Parallel Lift & Slide Window using S560-S584 and typology PLS4 Two Sash Parallel Lift & Slide Window large sash use only S584 have been corrected
10/25/2023
- Section No19 for the adjoining profile S31694 for meeting stile typologies has been corrected
10/25/2023
- The chapter of profile machinings has been updated
10/12/2023
- The bill of materials of the typology No14 Single sash entrance door opening outward with glass panel and kickplate has been corrected.
10/12/2023
- Profile M4587 (Glazing bead for powder coating) and Profile M4589 (Glazing bead for anodizing) have been added on the profiles chapter. Glazing beads have also been added on glazing list for sashes Μ4542 and M4544 and the glazing thickness is 21-25mm.
10/12/2023
- Profile M8238 (Base profile) and accessory 8305031380 (anchor) have been added.
- General catalog update.
10/12/2023
- 34 Entrance doors typologies have been added (No38-Νο71).
- Corner cleat machining has been updated.
- Machinings of the profile S77121 (decorative-narrow adjoining profile) have been added
10/3/2023
- Accessories 6603160913 και 6603065213 (inner support plates) have been added.
- Note has been added that in the case of S650 with subsill the upper central seal must be removed before installing the interlock caps 311316043 and 3113160953
10/3/2023
- The solution of top hung flyscreen has been removed (All profiles and accessories related to it have been removed)
10/3/2023
- The solution of top hung flyscreen has been removed
September 2023
9/15/2023
- Roller extension machining has been added
9/15/2023
- Cuttings of low threshold S67684 have been corrected on Single leaf door outward opening typology
9/15/2023
- Cuttings have been changed for sash S35011 in PS5 typology Two Sash Parallel Sliding Window 45 Degrees Cut with Narrow Interlock and Flyscreen
9/15/2023
- Tooling for frame corners 800-20-031-00 has been replaced by 800-20-071-00. Machining drawings have been added.
9/15/2023
- Cuttings of Interlock PVC code 6604548003 have been changed (H-216) in PLS2 and PLS4 typologies due to a change of the end caps
9/15/2023
- Cuttings have been corrected in single sash entrance door opening inward with glass panel typology (No2)
9/15/2023
- Transom M70083, New Shoe bracket AL70002 and its installation have been added