Technical News
Find what you need fast and easily
February 2023
2/22/2023
- One component fast setting adhesive (for glass pane secondary sealing with silicone) code 770-09-398-03 has been added on glazing assembly
2/22/2023
- Explanation of assembly of the rolling shutter 250Χ270 has been prepared on page 140
2/22/2023
- Μachining for crimp corner cleats for nail has been added on M9660 PHOS
2/22/2023
- Diagram for sash dimension constraints for the sliding sash profile with glazing bead S384-S384 has been corrected
2/22/2023
- Narrow key for corner typology code 757-65-069-70 and plate handle code 010-16-514-00 have been added on the corner typologies. The chapters of accessories has been updated.
2/22/2023
- Narrow key for corner typology code 757-65-069-70 and plate handle code 010-16-514-00 have been added on the corner typologies. The chapters of accessories has been updated.
2/22/2023
- "Τ" profile S70843 has been added on the chapter of profiles as well as its use with the 21,8mm glazing beads
2/22/2023
- Use of "Τ" profile S70843 with 21,8mm glazing beads has been added.
- Quantities for the meeting stile end cap for sash S70710 right code 311-00-767-03 have been corrected in 7B typology.
2/2/2023
- The updated fabrication manual of the S650 e-MOTION has now a brand-new mechanism that will replace the old one. It can also cooperate with all the existing profiles of S650 PHOS and S650 ECLIPSE.
2/2/2023
- Cutting of the additional profile S31698 in typology Ι Three-sash sliding window with 2 fixed has been corrected
2/2/2023
- The chapter of glazings has been updated.
- Corrections in typology PLS6 For Sash Parallel Lift and Slide 90 Degrees Cut Right Sliding Window with Meeting Stile:
- Cutting of meeting stiles S70734 has been corrected (H-117) and accessories 6600073400, 3110273403, 3110473403, 3111173403 have been added
2/2/2023
- Screws for M65102 have been added on the accessory list of the typologies