Technical News
Find what you need fast and easily
May 2022
5/10/2022
- Sliding frames with trimming profiles S314 & S318 have been added on the chapter of profiles.
5/10/2022
- Codes for double and triple connectors added on pages 59-60.
5/10/2022
- Millings tools 8523065200, 8523169000, 8523170300 added on the chapter of accessories.
- Corner connector 1451881830 added on the corner typology "H" and on the chapter of accessories.
- The chapter of accessories has been updated.
5/10/2022
- Millings tools 8523065200, 8523160900, 8523169000 added on the chapter of accessories.
- The technical information has been updated. It is recommended to use our electrical system S650 E-motion for sliding sash weight> 400kg compared to the previous sliding sash weight> 300kg.
5/10/2022
- Top Mount Sash Holder for Hurricane Level code 415-70-060-00 added on the chapter of accessories.
April 2022
4/21/2022
- Sash dimensional restrictions have been added on the sash M19834: Width:1000mm, Height:2500mm, Weight:80kg
4/21/2022
- Sash dimensional restrictions have been added on the technical characteristics:Width:1000mm, Height:2500mm, Weight:80kg
- Cuttings for fivefolding door have been corrected H =Y-107,8mm with M9837 (folding railing system profile)
4/21/2022
- Accessory 6604542003 sash pvc for M450 lift and slide has been replaced by 6604542103 in all fabrication manual that also works with the lift & slide mechanism with pins
- Furthermore the structure of the fabrication manual has been updated to make it more comprehensive
4/21/2022
- Accessory 6604542003 sash pvc for M450 lift and slide has been replaced by 6604542103 in all technical catalogue that also works with the lift & slide mechanism with pins
4/21/2022
- Glazing thickness 26mm added on M9660phos sections
4/21/2022
- Milling of hinge in threshold S11536 added on page 102
- Drainage milling for Threshold S11536 added on page 115
4/13/2022
- End cap 430-57-670-00 for M5767 added on the chapter of accessories.
- Additional support profile for shutters M5757 added on the chapter of profiles.
- Below profiles and woodalux profiles added on the technical catalogue to complete the solution with the horizontal side shading louvers.
- Section with the solution of side shading has been added on page 198.
4/13/2022
- Additional profile S77982 replaced by S77968 for better operation in the chapter of profiles, in 9 typology Single sash entrance door opening inward with glass Panell one fixed side sash with transom and kickplate and in typology 10 Single sash entrance door opening inward with glass Panell one fixed side sash with vertical T and concealed drainage kickplate. In those typologies cuttings, sections and the list of accessories have been changed.
- Double crimping corner 5Χ4,8mm code 113-15-048-00 and crimping corner 12,6Χ31mm code 113-13-310-00 have been added on the chapter of accessories.
4/13/2022
- Crimp nail cleat 113-15-192-00 has been replaced by 114-15-192-00 for frame M19620 improving the screwing of the hinge.
- Drilling Jig For Cast T Connectors code 165-00-001-00 has been added on the chapter of accessories.
- Additional "profiles for corner typologies" M11178 and M11922 added on the chapter of profiles.
4/13/2022
Pneumatic punching machines added on the chapter of accessories:
- EX-8002020100
- EX-8002020123
- EX-8002020124
- EX-8002020125
- EX-8002020126
- EX-8002020127
4/13/2022
- Composite louver main profile M5695 added on the chapter of profiles.
- Technical information chapter has been updated. Maximum Span charts have been included for all blades.
4/5/2022
- Sash gasket 2400045601 replaced by 2400045420 for optimal operation in all technical catalogue and in fabrication manual
- Attention! the new gasket 2400045420 is installed in the sash by sliding it through the sash groove, not clamped, as shown at page 34 of the fabrication manual
4/5/2022
- Machinings of corner adjoining profiles have been updated (pages 31-36)
4/5/2022
- Sash gasket 2400045601 replaced by 2400045420 for optimal operation in all technical catalogue and in fabrication manual
- Attention! the new gasket 2400045420 is installed in the sash by sliding it through the sash groove, not clamped, as shown at page 34 of the fabrication manual
4/5/2022
- Cuttings of PVC profile for thermal break interlocking profile 660-31-609-00 have been corrected (Fh - 203mm) in all typologies