Alumil Greece
Choose your local website

Technical News

Find what you need fast and easily
Search
April 2022
Renewal of technical catalogue SMARTIA FC10
  • End Cap for Bottom base rail M8363 code 8308363000 added on the chapter of accessories
March 2022
New Fabrication Manual SMARTIA M450
  • You can find below the fabrication manual for the SMARTIA M450 system.
Renewal of technical catalogue SMARTIA M450
  • PS7 typology "Two Sash Parallel Sliding 90° Cut Right Opening Window with sash M4544" has been added.
  • PS8 typology "Three Sash Sliding 90° Cut Right Opening Window with Sash M4544" has been added.
  • Quantities of 6604542003 Hardware Spacer PVC have been corrected in typologies PLS6, PLS7 (7 pieces H-93).
  • Quantities of profile Μ4552 Glazing bead have been corrected in typologies PLS2-PLS4 (2 pieces H-249.2).
Renewal of technical catalogue SMARTIA S67
  • Vulcanized corner for pivot 255-67-148-03 added on the chapter of pivot typologies (50 & 51) and on the chapter of accessories.
Renewal of technical catalogue SUPREME SD77
  • S77980 adjoining sash profile for inswing door added on the chapter of profiles.
  • Profiles of Sashes added on the max dimensions diagrams pages 178 and 179.
  • Standard Cylinder and Security Cylinder added on the chapters of General Milling-Tooling Operations and accessories.


    Renewal of technical catalogue SMARTIA MD67
    • Profiles of Sashes added on the max dimensions diagrams pages 101 and 102.
    • Standard Cylinder and Security Cylinder added on the chapters of General Milling-Tooling Operations and accessories.
    Renewal of technical catalogue SMARTIA M13700-M13800 (Rolling Shutters)
    • Profile M1035 Flat rolling shutter guide with 200mm wing added, compatible with 25x27 box.
    • Intermediate rolling shutter divider 765-13-185-00 (cast aluminium), added in all 185x191mm boxes, i.e. flat & curved, non insulated & insulated (M13700 & M13800).
    • The installation of the intermediate rolling shutter divider is added on the chapter of milling-tooling operation on page 150.
    Renewal of technical catalogue SUPREME SF85
    • Installation of sash add on profiles for 2+2 typologies added on the chapter of assembly for accessories page 285
    • Additional width S85035 A=Sw+7 has been corrected in the typology 22 OUTWARD OPENING, 2+2 4-PANELS FOLDING DOOR
    Renewal of SMARTIA M45000 Technical Catalogue
    • Μ45028 sliding sash profile for single glazing added on profiles chapter.
    • The glazing list of Μ45028 sliding sash added on the chapter of glazings.
    • Chapter of accessories has been updated.
    Renewal of technical catalogue SMARTIA S560LT
    • Porthole barrier for frame S30526 code 3153052600 (set) replaced by 3153052700 (pcs) in all catalogue. It is now purchased by pcs, not set
    • Cuttings of Additional Frame ​​​​​​​S30538 have been corrected in W/1-126.5 and W/2-126.5 in corner typologies
    Renewal of technical catalogue SMARTIA FC60
    • Catalogue has been updated

     

    Renewal of technical catalogue SMARTIA FC80
    • Cutting for Hidden shoot bolt in M8354

     

    Renewal of technical catalogue SMARTIA FC10
    • Cutting for Hidden shoot bolt in M8354 has been added on the catalogue
    • Basic typologies have been added 
    Renewal of technical catalogue SMARTIA M8200
    • New in floor base profile M8229 added on the catalogue
    Renewal of technical catalogue SUPREME SF85
    • Locking intermediate mechanism detail added on page 230 of the catalogue
    Renewal of technical catalogue SMARTIA S67
    • Profile cutting lists have been corrected on the typologies 23 & 31
    Renewal of technical catalogue SMARTIA S67 URBAN
    • The chapter of glazing has been updated
    Renewal of technical catalogue SMARTIA M35
    • Mullion Water Evacuation Machinings have been added on the chapter of Millings page 10
    Renewal of technical catalogue SUPREME S77
    • Typology icon of the typology No19 was corrected (Single side-hung casement, tilt and turn with fixed and asymmetric T-Profile)
    • Profile S77042 was added on profiles of machining tool 852-77-916-00 for the "T" profile of hidden sash page 264