Technical News
Find what you need fast and easily
January 2022
1/18/2022
- Typology 23 Six Sash Parallel Slide (90°INTERIOR CORNER) with Low Triple Frame added on tech. catalogue
- Flyscreen Cutting lists were corrected in typologies 24 & 25 (see below)
1/18/2022
- S11528 profile (additional profile frame/sash) replaced by S11521 for smoother assembly
- Handle profile end cap codes for S11532 profile have been corrected (Handle profile for glass panel)
1/4/2022
- Sliding Double Sash Gate with moter added on technical catalogue
1/4/2022
- The cuttings were corrected for the meeting stile profile S360 (H-94,8mm) in ILS3 & ILS4 typologies
- Cuttings for S350 Frames were corrected in pages 52 of typologies sections chapter in the ILS1, ILS2, ILS3, ILS4 typologies
1/4/2022
- Shoot-bolt Adjuster 474-65-104-00 added on all typologies, millings operations chapter and accessories chapter
1/4/2022
- Triple track assembly (S31712+S31714) added on page 59
- Interlocking assembly added on page 21
1/4/2022
- Triple track assembly (S31712+S31714) added on page 68
1/4/2022
- Sash ventilation machinings added on the chapter of Milling-Tooling Operations
- Μachining for hook profile for narrow fly-screen sash added on the chapter of Milling-Tooling
1/4/2022
- Sash ventilation machinings added on the fabrication manual page 35
1/4/2022
- The cutting of the adjoining profile height corrected in typology 19 (Double sash entrance door opening inward with glass panel)
- The code of the single point lock has changed
1/4/2022
- Max horizontal & vertical load resistance for all nine (9) subframe brackets
1/4/2022
- The accessories chapter was updated
- 6106521003 "CUSTOM SCREW FOR S650 HANDLE M5X6.5 BLACK INOX" added
1/4/2022
- New typology added "Three-sash sliding window with gutter"
- Accessory 112-63-000-00 "Corner set for Μ630 corner construction " added on the accessories chapter
- "Dimensional Limitations" chapter updated
1/4/2022
- Code 380-81-076-67 "WINDOW HANDLE 7mm STEEL LOOK F9" added on accessories chapter
- Handle facades 380-94-766-ΧΧ & 380-99-766-ΧΧ deleted from the accessories
December 2021
12/9/2021
- Glass unit height was changed in typology K "Three-sash parallel sliding window with flat frame" (Fh-135mm)
12/9/2021
- Correction of glazing cuttings for the typology 1 "Two Sash Parallel Sliding 45° Cut"
12/9/2021
- The technical catalogue for SMARTIA M450 system is now available
12/3/2021
- Low threshold end cap for M19862 code 310-11-172-10 replaced by code 310-19-862-00
- This end cap was added to Assembly for Accessories chapter on page 258