Technical News
The following changes have been made:
- panic door typology added on catalog (no 3.3)
- S77882 profil added on catalog
- 310-67-882-03 and 310-67-472-03 added on page 122
The following changes were made:
- S95774 low threshold added on catalog
- 310-95-774-03 pair of caps for low threshold added on catalog (page 139)
- S95774 threshold extension option added on catalog (page 135)
We have conducted a new certification for our S91 casement system, single sash window (1200mm X 2500mm). The results of the certification are:
- Air permeability - Class 4
- Water tightness - E1650 (1650 Pa)
- Resistance to wind load - C5/B5
- Seal gasket 220-11-002-01 replaced with: 220-00-930-03, on typologies: No 1-6
- New typology sash inside of sash added on catalog
- 220-11-449-12 gasket for glazing bead replaced with 220-31-230-03
- Three pages added for lock installation and milling for typologies 2-0, 4-0. You 'll find this information at pages 237-239
- Four new accessories added on page 248
M9660 integrated window into door sash
We have created a new typology in M9660 system, where a window can now be integrated into a door sash. These kind of typologies are used in cases where, the door needs to be closed (or locked) but at the same time, one can open a small window from the inside. Drugstores is a very usual application of this typology.
The typology is available only for euro groove mechanism
M9660 use of same gasket for frame-sash
We have made a small change in the M9660 catalogue concerning euro groove typologies. You can now use the same gasket 220-00-930-03 both for the sash and the frame. This will optimize the fabricator's work, dealing with only one gasket instead of using one gasket for the frame and a different one for the sash.
- 720-10-858-00 is composed of 2 profiles (AL10858) with a length of 350mm each.
- 720-10-859-00 is composed of 4 profiles (AL10859) with a length of 350mm each.
- 720-10-968-00 for 6mm inner glass
- 720-10-969-00 for 8mm inner glass
- 720-10-970-00 for 12mm inner glass