Technical News
Find what you need fast and easily
April 2024
4/17/2024
Frame corner 130-05-550-00 for frame P161 and its machinings have been added
4/17/2024
- New minimal horizontal flyscreen system (IFS typologies) has been added
4/17/2024
- End cap 3116316620 details for Two-sash sliding window with flyscreen and gutter have been added
- Flyscreen cutting has been corrected
4/17/2024
- Meeting stile machining S70734 for low threshold S70786 - S70790 has been updated
- Cutting Sh-4,5mm for cnc machining has been added in meeting stiles typologies with short frame guide use
4/17/2024
Inner glazing gaskets 200-04-023-01 (2-3mm) have been replaced by the below codes:
EX-2000900201 2mm
EX-2000900301 3mm
EX-2000900401 4mm
Inner glazing gaskets 200-04-067-01 (6-7mm) have been replaced by the below codes:
EX-2000900601 6mm
EX-2000900701 7mm
EX-2000900801 8mm
4/17/2024
- Entry guide 765-13-706-03 has been replaced by 765-13-000-00
- Intermediate rolling shutter divider 765-13-022-00 has been added on roller-shutters 137-020Ν, 137-220Ν, 138-020Ν & 138-220Ν
4/17/2024
- Standard cylinder 110mm 25-10-75 (30/80) ALUMIL NICKEL has been added on Locks page 399
- Frame for expansion joint has been added S77988
4/17/2024
- Add-on profile M9407 has been added on the profiles and its assembly with the profile M9334 on the chapter of assembly
March 2024
3/28/2024
- Assembly and M63170 machining for 2-sash parallel sliding pocket window has been added typology 18
3/28/2024
- Assembly and M63170 machining for 2-sash parallel sliding pocket window has been added typology 18
3/28/2024
- Glazing has been update with separate chapter and glazing configuration for M84002 per glazing thickness has been added
3/28/2024
- Machinings 660-00-702-00 pvc for frame guides have been added
- Drainage plan for frame S70798 for fixed with sliding INDOOR has beed added
- In typology 20 Fixed with sliding INDOOR the cutting of the frame additional profile S70758 has been corrected
- S70758 machining that applies in typology Fixed with sliding INDOOR has been added
3/28/2024
- Corner locking machining has been added on pages 194, 195
3/28/2024
- Sections of the corner typologies have been updated
3/28/2024
- Two typologies 27 & 28 with winbreak Euronut Hardware have been added
- Two typologies 37 & 38 with winbreak
- Euro-groove Hardware have been added
- Hidden sashes have been added on diagrams of the sash dimension constraints
3/28/2024
- Profiles that have been added: Μ70039, Μ70073, Μ70138, Μ70140
- S-20x15x1,2 profile has been replaced by S-20x15x1,3
- Machinings for profiles M70079, M70080 M70085 have been added
- Detailed list of thermal break selection and pressure plate screw length depending on glazing width
- Machinings of M70027 have been changed
- Hyperlink of profiles in Profile Index with the IPM
- New flexible menu with Bookmarks and dynamic table of contents
3/7/2024
- Fixing of the profile S50143 has been added on fabrication manual of each system
3/7/2024
- Fixing of the profile S50143 has been added on fabrication manual of each system
3/7/2024
- Fixing of the profile S50143 has been added on fabrication manual of each system
3/7/2024
- Fixing of the profile S50143 has been added on fabrication manual of each system