Technical News

• GLAZING INSULATING GASKET 200-11-155 4-5mm has been added on the accessories chapter
• GLAZING INSULATING GASKET 200-11-157-02 has been changed to 3-4mm
• GLAZING INSULATING GASKET 200-11-156-02 has been changed to 6-7mm

• GLAZING INSULATING GASKET 200-11-155 4-5mm has been added on the accessories chapter
• GLAZING INSULATING GASKET 200-11-157-02 has been changed to 3-4mm
• GLAZING INSULATING GASKET 200-11-156-02 has been changed to 6-7mm

• Availability of typologies has been updated page 35
• Corner typologies have been added on pages 115-119

• S35019 Trimming profile for sash pocket sliding has been added on index, profiles 1:1 and all pocket typologies.
• Old trimming profile S379 has been deleted from the technical catalogue.
• Accessories 240-00-462-01 Sash gasket and 660-00-363-03 Narrow Interlock PVC has been added on all wall sliding typologies.

• S35019 Trimming profile for sash wall sliding has been added on index, profiles 1:1 and all wall sliding typologies.
• Old Trimming profile S379 deleted from the technical catalogue.
• Accessory 240-00-462-01 Sash gasket has been added on all wall sliding typologies.
• Profile 14684 Trimming profile has been added on the index and profiles 1:1
  

• Accessory 255-40-130-03 second Level drain gasket added on the chapter of accessories. The 3d is on Page 262.
• M71214 profile (curtain wall mullion) corrected Inner corner section changed (page 117)
  

• 3 profiles sashes for ventilation flap (S37122, S67124, S67127) added on the index and profile chapter 1:1.
• Typology and new chapter for ventilation flap added on (page 315). 310-67-122-03 accessory cap for ventilation flap added on accessories chapter and in the new chapter ventilation lab that shows its tooling operations.
• Glazing insulating gasket 200-11-156-01 replaced by 200-11-156-02.
• Glazing insulating gasket 200-11-157-01 replaced by 200-11-157-02

• Profile M9845 (slim sash profile) added on the profile index chapter and in profiles 1:1 with its section.

• S35019 Architrave profile for sash pocket sliding added on index, profiles 1:1 and all pocket typologies (12-17). Old Architrave profile S379 deleted from the technical catalogue.
• Accessories 240-00-462-01 Sash gasket, 240-56-001-03 Ιnterlock sash gasket for in wall typologies and 660-00-363-03 Narrow Interlock PVC added on all pocket typologies and on the accessories chapter. Brush No 12 code 620-69-112-03 is used only once in S350159. In the old Architrave profile S379 we used two brushes.

• New catalogue S350LT, parallel sliding window with low truck.

• Accessory 470-67-102-00 "S67 Urban Cutting Jig" has been added on the accessories chapter

Codes replacements of energy bars:

• 313-22-025-00 is replaced with 313-20-033-00
• 313-22-033-00 is replaced with 313-20-043-00
• 313-10-010-00 is replaced with 313-10-011-00

• Central seals 660-14-146-00, 660-14-230-00, 660-14-250-00, 660-14-345-00 (aluminium) have been replaced by Central seals 240-35-146-00, 240-35-230-00, 240-35-250-00, 240-35-345-00 (epdm) in all typologies. Those accessories have been deleted from the accessories list.

• Central seal 660-14-345-00 (aluminium) has been replaced by Central seal 240-35-345-03 (epdm) in all typologies. This accessory has been deleted from the accessories list.
  

The following have been added on Index Profile and Profiles 1:1 chapter:

• Hinged frame Μ958 
• Add-on Profile Μ990
• Sash Profile Μ970
• Sash Profile Μ973
• Accessory 310-00-990-03 "End cap for additional profile M990" has been added on the accessories chapter

• Typology "Double leaf entrance door opening outward with narrow reversing mullion" has been added on the technical catalogue (No 18)

• Accessory EX-3116316303 has been added on the chapter of accessories and typologies DRAINAGE ADAPTOR D25/ D32 FOR M630-S560
• Accessory EX-3116317800 has been added on the chapter of accessories and typologies PAIR OF END CAPS FOR M63178 SUBSIL

3 corner typologies have been added:

• Νο 21 Corner assembly with four sash parallel slide ( EXTERIOR CORNER )
• Νο 22 Corner assembly with four sash parallel slide ( INTERIOR CORNER )
• Νο 23 Corner assembly with four sash parallel slide ( INTERIOR CORNER ) with Flyscreen

• The catalogue has been updated

• New typology OUTWARD OPENING, 2+2 and 4-PANELS FOLDING DOOR have been added on the chapter of sections No 22.
• Availability of typologies has been updated 250-85-030-03 (Gasket for even typology 2+2) has been added on the chapter of accessories