Technical News

• Gasket for fly-screen sash 250-07-310-33 has been replaced with 240-14-649-03 pvc for fly screen sash in all typologies. This accessory has been added on the chapter of accessories.

• Profile S67148 (Pivot vent) and profile S67046 (reversing profile) has been added on the profile index and in profiles 1:1 chapter.
  

• Gasket for fly-screen sash 250-07-310-33 has been replaced with 240-14-649-03 pvc for fly screen sash in all typologies. This accessory has been added on the chapter of accessories.

• Gasket for fly-screen sash 250-07-310-33 has been replaced with 240-14-649-03 pvc for fly screen sash in all typologies. This accessory has been added on the chapter of accessories. List of accessories updated.

• Sash profile S95072 has been added on the technical catalogue

Typologies have been removed:

• Single side-hung casement tilt & turn, low sill, opening outwards, Unijet Mechanism
• Single side-hung casement tilt & turn, with kickplate, low sill, opening outwards, Unijet Mechanism

• Pvc for Fly Screen Sash code 240-14-649-03 has been added on the chapter of accessories.
• Gasket for fly-screen sash (7,7mm) code 250-06-220-33 has been replaced replaced by Pvc for Fly Screen Sash code 240-14-649-03 in all typologies with fly-screen sash
  

• Sash outward opening for windows M19630 has been added on profiles 1:1
• NRG BARS codes and images have been added on profiles 1:1, and also on the accessories chapter

• 3113167303 Interlocking Sear for S650 has been added on the chapter of accessories
• New typology 4Sash -3Track sliding window with flyscreen and meeting stile has been added on the new technical catalogue

• General milling-tooling operations for "T" has been added on the technical catalogue
• Machining tool 852-67-104-00 has been added on the chapter of accessories

• Upper Central Seal Fixed Outside code 311-70-798-00 has been added on the accessories chapter.
• Also, on the typology 20 Fixed with sliding INDOOR End Cap Set for Fixed lift/slide Sash Inside 300-00-734-01 has been added on the chapter of accessories and general milling-tooling operations

• 640-65-009-00 - Front lock protection for S650 parallel and meeting style have been added on the accessories chapter.
• 240-31-708-03 - Fly screen end profile gasket S650 has been added on the accessories chapter S31718 -
• Add-on profile has been added on the profiles chapter
• Cutting lists and typologies sections have been updated
  

• Code 300-03-590-00 (End Cup Set for Simple Sliding Meeting Stile) has been added on the accessories chapter.

• Additional profile M9080 and the typology have been removed from the technical catalogue.
• Corrections have been made.

• Code 660-30-552-00 (FRAME CONNECTOR FOR DOUBLE, TRIPLE AND MULTITRACK S560LT) has been added on the accessories chapter. It has also been added on the chapter of general milling-tooling operations.
• Accessories list has been updated. Code 3000259003 has been replaced by 3003159000 (gasket for meeting stile bottom end cap) in typologies PLS8, PLS9, ILS6, ILS7, ILS8 & ILS9

• Profiles have been added for roof window, hinged frame Μ70124, hinged sash Μ70127 and additional profile on the chapter of 1:1 profiles and profiles index 3 section added on page 180-182 for roof window.
  

• Chart accessory correction for profile: S67684 page. 53
  

• NRG BARS codes and images have been added on profiles 1:1, as well as on the accessories chapter

• Bottom Central Seal code 240-70-798-00 has been added on the chapter of accessories and general milling-tooling operations.

• Accessories 311-12-532-00 (Corner assembly left end cap) & 311-12-533-00 (Corner assembly right end cap) has been added on the chapter of accessories.